Mini Cooper Parts and Accessories: Alarm Retrofit Kit Installation Instructions

The vehicle is optional alarm pre-wiring, which is 100% optional for U.S. spec vehicles. … recorded over the harness. 1.5. Carefully remove the protective tape to expose ….

More PDF Content

1.Siren/Tilt Sensor Installation …4
2.Hood Switch Installation …6
3.Interior Ultrasonic Module Installation …7
4.Retrofit Coding …8
5.Wiring Diagrams …10

Remove left cowl panel cover. Refer to WebTIS 51 13 123. X14147 found taped to wire harness. Attach alarm siren-tilt se washer (3). Direct alarm siren-tilt se nsor/mounting bracket assem- bly (1) into position underneath windshield wiper arm linkage in LH cowl area as shown. X14147 to siren/tilt sensor as shown…

Hood Switch Installation place with countersunk screw(2). Note: Make sure corner notch on bracket faces rearward and fits into base mounting tab. Locate 3-position black connector X161 found taped to wire harness (1). Carefully remove protective tape to expose connector. Insert hood switch (1) into hood switch bracket (2) with connector facing cowl area as shown. Connect hood switch harnes s connector (3) to hood Note: On some early prod uction vehicles the hood switch harness may be of insufficient length to make connection as shown in illustration 056 020 US.

Download Mini Cooper Parts and Accessories: Alarm Retrofit Kit Installation Instructions pdf from www.minimania.com, 11 pages, 628.78KB.
Related Books

One Response to “Mini Cooper Parts and Accessories: Alarm Retrofit Kit Installation Instructions”

  1. alarmasparacasasahora.com on November 1st, 2012 at 7:19 pm

    Hello to all, the contents present at this web page are really
    amazing for people experience, well, keep up the good work fellows.

Leave a Reply