Pressure Washer Repair Manual

PW-MANUAL. 1. Tab: Accessories. Pressure Washer Accessory Compatibility Guide. For use with cleaner models, gas pressure to 2300 PSI, 2 GPM. ….

More PDF Content

Pressure Washer Accessory Compatibility Guide

  1. Shut off the pressure washer and turn off the water supply.
  2. Disconnect spark plug wire.
  3. Pull trigger on gun handle to relieve any water pressure.
  4. Disconnect the lance from the gun.
  5. Remove the nozzle from the end of the wand with the 2mm allen wrench.
  6. Clean the nozzle using the nozzle cleaner provided or a straightened paper clip. Insert into the nozzle end and work back and forth until obstruction is removed.
  7. Direct water supply into nozzle end for 30 seconds to backflush loosened particles .
  8. Reassemble the nozzle to the wand. Tighten securely to prevent leaks.Reassemble lance to gun.

Nozzle cleaning:
If the nozzle becomes clogged with foreign materials, such as dirt, excessive pressure may develop. If the nozzle becomes partially clogged or restricted, the pump pressure will pulsate. Clean the nozzle immediately using the nozzle kit supplied and the following instructions:

  1. Shut off the pressure washer and turn off the water supply.
  2. Disconnect spark plug wire.
  3. Pull trigger on gun handle to relieve any water pressure.
  4. Disconnect the lance from the gun.
Download Pressure Washer Repair Manual pdf from www.devilbissparts.com, 6 pages, 324.05KB.